We are happy to bring you our custom plate for JLF/JLX joysticks.
The plate allows you to rotate the lever axis while keeping the main holes perpendicular to the edge of the controller.
By downloading the STL file you can print it and try it using any FDM 3D printer.
The plate is designed to play clockwise and anticlockwise in 3 positions.
First layer horizontal expansion: -0.3
The file is already oriented for printing
IMPORTANT editing tips:
The 4 internal screws of the joystick must be unscrewed from the original plate. On the threads of these screws, both in the JLF and in the JLX, there is a thread-locking fluid which makes it difficult to remove the screws. It is advisable to act with great caution, to wet the back of the screws with a lubricant, such as Wd40 or similar, or better yet to use a specific solvent for thread locks and let it act before trying to unscrew the screws. If you are not careful, the screw threads can be damaged.
WE RECOMMEND using a PH2 screwdriver.
However, we recommend purchasing a set of 4 spare M3 countersunk head screws separately, perhaps in stainless steel.
The plate is in version 1.0/BETA. Use is free for personal use, not for sale.
If you intend to produce and sell the straightener, write to us.
Give us feedback and tell us what you think.
The design and concept of the plate are protected by DIGITAL CERTIFICATE FOR PROOF OF COPYRIGHT.